FAN SERVICE

Within a month, I received quite a lot of improvements fan. type of damage also varied. There is a total dead, there are going around but only slowly, there are a select 1-2 do not function but 3 functions, and there are still some other damage. But most of the damage is totally dead. Usually death total damage caused by the breakup FusePTC contained in the motor of the fan coil. And she decided FusePTC is usually caused by overheating the motor. Causes Overheating of the motor can use the error (continuous usage time 24 hours non stop), or also from dryness of fat that serves as a lubricant. But many are also caused because of the many dust and go on as the motor shaft. I will discuss in this post is a dead fan damage caused by the breakup FusePTC total. FusePTC is a component that deliberately inserted in the coil that serves as security for the coils of the threat of fires caused by overheating. FusePtc have maximum temperatures below 80 degrees centigrade. So if the heat generated by the coil exceeds 80 degrees centigrade then FusePTC will automatically break up by itself so that the coil is safe from fire. Now with the meal break FusePTC fan will not turn on. How to fix it is we dismantle all parts of the fan, such as propeller blades, propeller blades close and we take the driving motor. Motor us unloading by opening the four bolts and then slowly we observe the main cable connection, there would have FusePTC question. FusePTC we replace with a new one at an electronics store because now many that provide it. After replacement we tie up neatly back all the connections. Mator and then replace the drive. And do adjustments as round as a fan so it does not drag, and more good again coupled with a fat (lubricant). After the fan rotation is felt just right then reinstall all the parts. Finally finished this one work well, the fan could be going around again.